A Merida Ninety-Six XC uses a Braze-on (direct-mount) front derailleur for the front derailleur. The dimensions, how to confirm it on your frame, and how it compares to the neighbouring standards.
Updated 05 September 2026.
What front derailleur mount does a Merida Ninety-Six XC use?
The front derailleur fitment standard on a Merida Ninety-Six XC, and how to pick the right part.
| Frame | Merida Ninety-Six XC |
|---|---|
| Front derailleur mount | Braze-on (direct-mount) front derailleur (braze-on tab) |
| Mount / band size | no clamp, bolts to a frame tab |
| Typical class | carbon and higher-end aluminium road, gravel and MTB frames with a moulded or welded derailleur tab |
The Merida Ninety-Six XC uses a ZS44 zero-stack upper headset (zero stack, 44 mm), a 30.9 mm class seatpost, a 15x110 mm Boost front thru-axle at the front (15 mm x 110 mm Boost, front) and a braze-on front derailleur.
Most builds are 1x, so the front-derailleur mount note applies only to 2x setups. The rear is typically Boost 12x148; confirm your generation. The bottom bracket is covered on its own page.
SOURCES: BikeRadar, Front derailleurs explained: types, mounts and compatibility · Shimano, SM-AD91 front derailleur clamp band adapter · Park Tool, Standardized Headset Identification System (SHIS) · BikeRadar, Mountain bike axle standards: the complete guide
Questions and answers
What front derailleur mount does a Merida Ninety-Six XC use?
A Merida Ninety-Six XC uses a Braze-on (direct-mount) front derailleur for the front derailleur.