A Cannondale CAAD10 frame uses a BB30 press fit bottom bracket shell (42 mm bore press fit). The dimensions, which cranks fit, and the exact bottom bracket to buy.
Updated 05 September 2026.
What bottom bracket does a Cannondale CAAD10 use?
The bottom bracket shell standard on a Cannondale CAAD10, and how to pick the right BB.
| Frame | Cannondale CAAD10 |
|---|---|
| Shell standard | BB30 press fit (42 mm bore press fit) |
| Shell inside diameter | 42 mm smooth press-fit bore |
| Shell width | 68 mm (road) and 73 mm (MTB) |
SPINDLE see table
The Cannondale CAAD10 uses a BB30 press fit bottom bracket shell (42 mm bore press fit), a 42 mm smooth press-fit bore, 68 mm (road) and 73 mm (MTB) wide.
It is a press-fit shell, so bearings or cups press into the 42 mm smooth press-fit bore. Match the shell width as well as the bore, because a shorter unit will not preload the crank across a wider shell.
SOURCES: Wheels Manufacturing, Three Common Bottom Bracket Misconceptions · Park Tool, Bottom Bracket Standards and Terminology
Questions and answers
What bottom bracket does a Cannondale CAAD10 use?
A Cannondale CAAD10 frame uses a BB30 press fit bottom bracket shell (42 mm bore press fit).